Pneumatic Hose Repair Fitting Kit, 1/4 Inch Brass Hose Splicer

<p>This set contains four brass pneumatic hose splicers for repairing damaged air hoses with a 1/4 inch inside diameter. Each splicer has a barbed center body with threaded ends, and a brass nut on each side that tightens over the hose to hold it in place. Cut out the damaged section, slide the nuts onto the hose ends, push the barbed ends inside, and tighten the nuts to seal the connection.</p><ul><li>Four brass hose splicer bodies</li><li>Eight brass nuts</li><li>Two rolls of thread seal tape</li></ul><p>Measurements from the product size chart: the nut opening is 0.5 cm (0.19 inch) across, the barb is 0.86 cm (0.34 inch) in diameter, each nut measures 1 cm (0.39 inch) wide and 1.87 cm (0.73 inch) long, and the center body is 4 cm (1.57 inches) long. The fittings are made for PVC and PU pipes. Each unit is one kit of four splicers with eight nuts and two tape rolls.</p>

Free U.S. shipping on orders over $75.00. Standard shipping is $6.99 below that, dispatched in 1-2 business days with 3-6 days in transit.

Full shipping policy →

Returns and exchanges are accepted within 30 days of delivery, with no restocking fee.

Full return policy →