Hose Repair Fittings Set, 4 Brass Reusable Hose Splicers

<p>A set of four brass hose splicers for mending a cut or damaged hose without replacing the whole length. Each splicer has a barbed center that pushes into the two cut ends, and a threaded nut on each side is tightened to seal the connection.</p><ul><li>Four brass splicer bodies with 1/4 inch barbs for 1/4 inch inside diameter hose</li><li>Eight brass nuts, two per splicer</li><li>Splicer length about 4 cm (1.57 in); nut about 1.87 cm (0.74 in) long</li><li>Choose two rolls of white thread seal tape or one black pipe cutter</li></ul><p>To repair, cut out the damaged section, slide a nut onto each end, push the barbs into the hose, and tighten the nuts with a wrench. The photos show the splicer used on red air and water hose.</p><p>Each unit is one set of four splicers with eight nuts, plus the tape or cutter named in your option.</p>

Free U.S. shipping on orders over $75.00. Standard shipping is $6.99 below that, dispatched in 1-2 business days with 3-6 days in transit.

Full shipping policy →

Returns and exchanges are accepted within 30 days of delivery, with no restocking fee.

Full return policy →