Drill Pump Attachment for Water and Fuel Transfer, 1/4 or 3/8 Inch

<p>This handheld drill pump attaches to a standard power drill and turns it into a fluid transfer pump. It fits a 1/4 inch or 3/8 inch chuck, and the drill's speed sets the flow. It is self-priming, so you connect the hoses and start the drill without manual suction.</p><ul><li>Fits a standard power drill (18V cordless or corded) with a 1/4 inch or 3/8 inch chuck</li><li>Self-priming, no manual suction needed</li><li>Listed for water, oil, diesel and gasoline, with a flow rate of 3-5 gallons per minute depending on drill speed</li><li>Includes two mounting brackets, two stainless steel hose clamps and two screws</li><li>Black plastic housing with 0.63 inch (16 mm) hose barbs on each side</li></ul><p>Product size: about 4.96 inches (126 mm) long and 2.48 inches (63 mm) high. Use it to drain a water heater, empty a rain barrel, or move fluid from a can. Each unit is one drill pump with two mounting brackets, two hose clamps and two screws.</p>

Free U.S. shipping on orders over $75.00. Standard shipping is $6.99 below that, dispatched in 1-2 business days with 3-6 days in transit.

Full shipping policy →

Returns and exchanges are accepted within 30 days of delivery, with no restocking fee.

Full return policy →