Car Audio Amp Input Wire Reducers 0 to 4 Gauge, Nickel-Plated Brass

<p>Four nickel-plated brass amp input wire reducers that let a 0-gauge power or ground cable connect to a 4-gauge amplifier terminal. Each reducer has a hex post at one end and a socket at the other, with a set screw that clamps the wire in place. Use them when your amp has 4-gauge power connectors but your cable is a larger 0-gauge wire.</p><ul><li>4 nickel-plated brass amp input wire reducers</li><li>4 hex set screws</li><li>2 black and 2 red heat shrink tubes for insulating the harness</li><li>1 hex tool for tightening the set screws</li></ul><p>Measurements from the listing: overall length 1.87 inches, hex post 0.98 inches, and socket opening 0.62 inch wide by 0.76 inch tall. The brass body is plated for corrosion and oxidation resistance. To install, remove the screws with a wrench, insert the wire, then seal the harness and reducer with heat shrink tube.</p><p>Each unit is one set of four amp input wire reducers with set screws, heat shrink tubes and a hex tool.</p>

Free U.S. shipping on orders over $75.00. Standard shipping is $6.99 below that, dispatched in 1-2 business days with 3-6 days in transit.

Full shipping policy →

Returns and exchanges are accepted within 30 days of delivery, with no restocking fee.

Full return policy →